#.
#Multiplier used for calculating how many ticks should initially be removed in fan processing recipes, based on how fast the fan is spinning.
#Range: 0.0 ~ 3.4028234663852886E38
fanSpeedMultiplier = 0.75

#.
#Parameters and abilities of Greate's kinetic mechanisms
[kinetics]

	#.
	#.
	#Fine tune settings related to belts
	[kinetics.belts]

		#.
		#.
		#Rubber Belt Settings
		[kinetics.belts.rubber]
			#.
			#Maximum length in blocks of rubber mechanical belts
			#Range: > 5
			rubberMaxBeltLength = 20

		#.
		#Silicone Rubber Belt Settings
		[kinetics.belts.silicone]
			#.
			#Maximum length in blocks of silicone mechanical belts
			#Range: > 5
			siliconeMaxBeltLength = 25

		#.
		#Polyethylene Belt Settings
		[kinetics.belts.polyethylene]
			#.
			#Maximum length in blocks of polyethylene mechanical belts
			#Range: > 5
			polyethyleneMaxBeltLength = 30

		#.
		#Polytetrafluoroethylene Belt Settings
		[kinetics.belts.polytetrafluoroethylene]
			#.
			#Maximum length in blocks of polytetrafluoroethylene mechanical belts
			#Range: > 5
			polytetrafluoroethyleneMaxBeltLength = 35

		#.
		#Polybenzimidazole Belt Settings
		[kinetics.belts.polybenzimidazole]
			#.
			#Maximum length in blocks of polybenzimidazole mechanical belts
			#Range: > 5
			polybenzimidazoleMaxBeltLength = 40

	[kinetics.stressValues]

		#.
		#Fine tune the kinetic stats of individual components
		[kinetics.stressValues.v2]

			#.
			#.[in Stress Units]Configure the individual stress impact of mechanical blocks. Note that this cost is doubled for every speed increase it receives
			[kinetics.stressValues.v2.impact]

				[kinetics.stressValues.v2.impact.andesite_alloy]
					rubber_belt_andesite_alloy = 0.0
					andesite_alloy_shaft = 0.0
					andesite_encased_andesite_alloy_shaft = 0.0
					brass_encased_andesite_alloy_shaft = 0.0
					andesite_alloy_cogwheel = 0.0
					large_andesite_alloy_cogwheel = 0.0
					andesite_encased_andesite_alloy_cogwheel = 0.0
					andesite_encased_large_andesite_alloy_cogwheel = 0.0
					brass_encased_andesite_alloy_cogwheel = 0.0
					brass_encased_large_andesite_alloy_cogwheel = 0.0
					andesite_alloy_crushing_wheel = 0.5
					andesite_alloy_encased_fan = 0.5
					andesite_alloy_gearbox = 0.0
					andesite_alloy_mechanical_press = 0.5
					andesite_alloy_mechanical_mixer = 0.5
					andesite_alloy_millstone = 0.5
					andesite_alloy_mechanical_saw = 0.5
					andesite_alloy_mechanical_pump = 0.5

				[kinetics.stressValues.v2.impact.steel]
					rubber_belt_steel = 0.0
					steel_shaft = 0.0
					andesite_encased_steel_shaft = 0.0
					brass_encased_steel_shaft = 0.0
					steel_cogwheel = 0.0
					large_steel_cogwheel = 0.0
					andesite_encased_steel_cogwheel = 0.0
					andesite_encased_large_steel_cogwheel = 0.0
					brass_encased_steel_cogwheel = 0.0
					brass_encased_large_steel_cogwheel = 0.0
					steel_crushing_wheel = 1.0
					steel_encased_fan = 1.0
					steel_gearbox = 0.0
					steel_mechanical_press = 1.0
					steel_mechanical_mixer = 1.0
					steel_millstone = 1.0
					steel_mechanical_saw = 1.0
					steel_mechanical_pump = 1.0
					tungsten_steel_gearbox = 0.0
					tungsten_steel_crushing_wheel = 3.0
					brass_encased_tungsten_steel_shaft = 0.0
					silicone_rubber_belt_stainless_steel = 0.0
					andesite_encased_large_tungsten_steel_cogwheel = 0.0
					andesite_encased_tungsten_steel_cogwheel = 0.0
					stainless_steel_mechanical_saw = 4.0
					stainless_steel_cogwheel = 0.0
					andesite_encased_stainless_steel_shaft = 0.0
					tungsten_steel_encased_fan = 3.0
					andesite_encased_large_stainless_steel_cogwheel = 0.0
					large_tungsten_steel_cogwheel = 0.0
					stainless_steel_shaft = 0.0
					tungsten_steel_cogwheel = 0.0
					stainless_steel_mechanical_press = 4.0
					large_stainless_steel_cogwheel = 0.0
					brass_encased_large_tungsten_steel_cogwheel = 0.0
					stainless_steel_mechanical_pump = 2.0
					brass_encased_large_stainless_steel_cogwheel = 0.0
					stainless_steel_encased_fan = 2.0
					stainless_steel_millstone = 2.0
					stainless_steel_gearbox = 0.0
					tungsten_steel_millstone = 3.0
					brass_encased_stainless_steel_shaft = 0.0
					tungsten_steel_mechanical_press = 6.0
					polyethylene_belt_tungsten_steel = 0.0
					tungsten_steel_shaft = 0.0
					stainless_steel_mechanical_mixer = 2.0
					andesite_encased_stainless_steel_cogwheel = 0.0
					andesite_encased_tungsten_steel_shaft = 0.0
					tungsten_steel_mechanical_saw = 6.0
					brass_encased_tungsten_steel_cogwheel = 0.0
					brass_encased_stainless_steel_cogwheel = 0.0
					stainless_steel_crushing_wheel = 2.0
					tungsten_steel_mechanical_mixer = 3.0
					tungsten_steel_mechanical_pump = 3.0

				[kinetics.stressValues.v2.impact.aluminium]
					silicone_rubber_belt_aluminium = 0.0
					aluminium_shaft = 0.0
					andesite_encased_aluminium_shaft = 0.0
					brass_encased_aluminium_shaft = 0.0
					aluminium_cogwheel = 0.0
					large_aluminium_cogwheel = 0.0
					andesite_encased_aluminium_cogwheel = 0.0
					andesite_encased_large_aluminium_cogwheel = 0.0
					brass_encased_aluminium_cogwheel = 0.0
					brass_encased_large_aluminium_cogwheel = 0.0
					aluminium_crushing_wheel = 1.5
					aluminium_encased_fan = 1.5
					aluminium_gearbox = 0.0
					aluminium_mechanical_press = 1.5
					aluminium_mechanical_mixer = 1.5
					aluminium_millstone = 1.5
					aluminium_mechanical_saw = 1.5
					aluminium_mechanical_pump = 1.5

				[kinetics.stressValues.v2.impact.stainless_steel]
					silicone_rubber_belt_stainless_steel = 0.0
					stainless_steel_shaft = 0.0
					andesite_encased_stainless_steel_shaft = 0.0
					brass_encased_stainless_steel_shaft = 0.0
					stainless_steel_cogwheel = 0.0
					large_stainless_steel_cogwheel = 0.0
					andesite_encased_stainless_steel_cogwheel = 0.0
					andesite_encased_large_stainless_steel_cogwheel = 0.0
					brass_encased_stainless_steel_cogwheel = 0.0
					brass_encased_large_stainless_steel_cogwheel = 0.0
					stainless_steel_crushing_wheel = 2.0
					stainless_steel_encased_fan = 2.0
					stainless_steel_gearbox = 0.0
					stainless_steel_mechanical_press = 2.0
					stainless_steel_mechanical_mixer = 2.0
					stainless_steel_millstone = 2.0
					stainless_steel_mechanical_saw = 2.0
					stainless_steel_mechanical_pump = 2.0

				[kinetics.stressValues.v2.impact.titanium]
					polyethylene_belt_titanium = 0.0
					titanium_shaft = 0.0
					andesite_encased_titanium_shaft = 0.0
					brass_encased_titanium_shaft = 0.0
					titanium_cogwheel = 0.0
					large_titanium_cogwheel = 0.0
					andesite_encased_titanium_cogwheel = 0.0
					andesite_encased_large_titanium_cogwheel = 0.0
					brass_encased_titanium_cogwheel = 0.0
					brass_encased_large_titanium_cogwheel = 0.0
					titanium_crushing_wheel = 2.5
					titanium_encased_fan = 2.5
					titanium_gearbox = 0.0
					titanium_mechanical_press = 2.5
					titanium_mechanical_mixer = 2.5
					titanium_millstone = 2.5
					titanium_mechanical_saw = 2.5
					titanium_mechanical_pump = 2.5

				[kinetics.stressValues.v2.impact.tungsten_steel]
					polyethylene_belt_tungsten_steel = 0.0
					tungsten_steel_shaft = 0.0
					andesite_encased_tungsten_steel_shaft = 0.0
					brass_encased_tungsten_steel_shaft = 0.0
					tungsten_steel_cogwheel = 0.0
					large_tungsten_steel_cogwheel = 0.0
					andesite_encased_tungsten_steel_cogwheel = 0.0
					andesite_encased_large_tungsten_steel_cogwheel = 0.0
					brass_encased_tungsten_steel_cogwheel = 0.0
					brass_encased_large_tungsten_steel_cogwheel = 0.0
					tungsten_steel_crushing_wheel = 3.0
					tungsten_steel_encased_fan = 3.0
					tungsten_steel_gearbox = 0.0
					tungsten_steel_mechanical_press = 3.0
					tungsten_steel_mechanical_mixer = 3.0
					tungsten_steel_millstone = 3.0
					tungsten_steel_mechanical_saw = 3.0
					tungsten_steel_mechanical_pump = 3.0

				[kinetics.stressValues.v2.impact.rhodium_plated_palladium]
					polytetrafluoroethylene_belt_rhodium_plated_palladium = 0.0
					rhodium_plated_palladium_shaft = 0.0
					andesite_encased_rhodium_plated_palladium_shaft = 0.0
					brass_encased_rhodium_plated_palladium_shaft = 0.0
					rhodium_plated_palladium_cogwheel = 0.0
					large_rhodium_plated_palladium_cogwheel = 0.0
					andesite_encased_rhodium_plated_palladium_cogwheel = 0.0
					andesite_encased_large_rhodium_plated_palladium_cogwheel = 0.0
					brass_encased_rhodium_plated_palladium_cogwheel = 0.0
					brass_encased_large_rhodium_plated_palladium_cogwheel = 0.0
					rhodium_plated_palladium_crushing_wheel = 3.5
					rhodium_plated_palladium_encased_fan = 3.5
					rhodium_plated_palladium_gearbox = 0.0
					rhodium_plated_palladium_mechanical_press = 3.5
					rhodium_plated_palladium_mechanical_mixer = 3.5
					rhodium_plated_palladium_millstone = 3.5
					rhodium_plated_palladium_mechanical_saw = 3.5
					rhodium_plated_palladium_mechanical_pump = 3.5

				[kinetics.stressValues.v2.impact.naquadah_alloy]
					polytetrafluoroethylene_belt_naquadah_alloy = 0.0
					naquadah_alloy_shaft = 0.0
					andesite_encased_naquadah_alloy_shaft = 0.0
					brass_encased_naquadah_alloy_shaft = 0.0
					naquadah_alloy_cogwheel = 0.0
					large_naquadah_alloy_cogwheel = 0.0
					andesite_encased_naquadah_alloy_cogwheel = 0.0
					andesite_encased_large_naquadah_alloy_cogwheel = 0.0
					brass_encased_naquadah_alloy_cogwheel = 0.0
					brass_encased_large_naquadah_alloy_cogwheel = 0.0
					naquadah_alloy_crushing_wheel = 4.0
					naquadah_alloy_encased_fan = 4.0
					naquadah_alloy_gearbox = 0.0
					naquadah_alloy_mechanical_press = 4.0
					naquadah_alloy_mechanical_mixer = 4.0
					naquadah_alloy_millstone = 4.0
					naquadah_alloy_mechanical_saw = 4.0
					naquadah_alloy_mechanical_pump = 4.0

				[kinetics.stressValues.v2.impact.darmstadtium]
					polybenzimidazole_belt_darmstadtium = 0.0
					darmstadtium_shaft = 0.0
					andesite_encased_darmstadtium_shaft = 0.0
					brass_encased_darmstadtium_shaft = 0.0
					darmstadtium_cogwheel = 0.0
					large_darmstadtium_cogwheel = 0.0
					andesite_encased_darmstadtium_cogwheel = 0.0
					andesite_encased_large_darmstadtium_cogwheel = 0.0
					brass_encased_darmstadtium_cogwheel = 0.0
					brass_encased_large_darmstadtium_cogwheel = 0.0
					darmstadtium_crushing_wheel = 4.5
					darmstadtium_encased_fan = 4.5
					darmstadtium_gearbox = 0.0
					darmstadtium_mechanical_press = 4.5
					darmstadtium_mechanical_mixer = 4.5
					darmstadtium_millstone = 4.5
					darmstadtium_mechanical_saw = 4.5
					darmstadtium_mechanical_pump = 4.5

				[kinetics.stressValues.v2.impact.neutronium]
					polybenzimidazole_belt_neutronium = 0.0
					neutronium_shaft = 0.0
					andesite_encased_neutronium_shaft = 0.0
					brass_encased_neutronium_shaft = 0.0
					neutronium_cogwheel = 0.0
					large_neutronium_cogwheel = 0.0
					andesite_encased_neutronium_cogwheel = 0.0
					andesite_encased_large_neutronium_cogwheel = 0.0
					brass_encased_neutronium_cogwheel = 0.0
					brass_encased_large_neutronium_cogwheel = 0.0
					neutronium_crushing_wheel = 5.0
					neutronium_encased_fan = 5.6
					neutronium_gearbox = 0.0
					neutronium_mechanical_press = 5.0
					neutronium_mechanical_mixer = 5.0
					neutronium_millstone = 5.0
					neutronium_mechanical_saw = 5.0
					neutronium_mechanical_pump = 5.0

			#.
			#Fine tune settings related to tiers
			[kinetics.stressValues.v2.maxCapacity]

				#.
				#.
				#Settings related to andesite tier machines
				[kinetics.stressValues.v2.maxCapacity.andesite]
					#.
					#Configure the max stress a kinetic block of this tier can support.
					#Range: > -2147483648
					andesiteMaxCapacity = 32

				#.
				#Settings related to steel tier machines
				[kinetics.stressValues.v2.maxCapacity.steel]
					#.
					#Configure the max stress a kinetic block of this tier can support.
					#Range: > -2147483648
					steelMaxCapacity = 128

				#.
				#Settings related to aluminium tier machines
				[kinetics.stressValues.v2.maxCapacity.aluminium]
					#.
					#Configure the max stress a kinetic block of this tier can support.
					#Range: > -2147483648
					aluminiumMaxCapacity = 512

				#.
				#Settings related to stainless steel tier machines
				[kinetics.stressValues.v2.maxCapacity.stainlessSteel]
					#.
					#Configure the max stress a kinetic block of this tier can support.
					#Range: > -2147483648
					stainlessSteelMaxCapacity = 2048

				#.
				#Settings related to titanium tier machines
				[kinetics.stressValues.v2.maxCapacity.titanium]
					#.
					#Configure the max stress a kinetic block of this tier can support.
					#Range: > -2147483648
					titaniumMaxCapacity = 8192

				#.
				#Settings related to tungstensteel tier machines
				[kinetics.stressValues.v2.maxCapacity.tungstensteel]
					#.
					#Configure the max stress a kinetic block of this tier can support.
					#Range: > -2147483648
					tungstensteelMaxCapacity = 32768

				#.
				#Settings related to palladium tier machines
				[kinetics.stressValues.v2.maxCapacity.palladium]
					#.
					#Configure the max stress a kinetic block of this tier can support.
					#Range: > -2147483648
					palladiumMaxCapacity = 131072

				#.
				#Settings related to naquadah tier machines
				[kinetics.stressValues.v2.maxCapacity.naquadah]
					#.
					#Configure the max stress a kinetic block of this tier can support.
					#Range: > -2147483648
					naquadahMaxCapacity = 524288

				#.
				#Settings related to darmstadtium tier machines
				[kinetics.stressValues.v2.maxCapacity.darmstadtium]
					#.
					#Configure the max stress a kinetic block of this tier can support.
					#Range: > -2147483648
					darmstadtiumMaxCapacity = 2097152

				#.
				#Settings related to neutronium tier machines
				[kinetics.stressValues.v2.maxCapacity.neutronium]
					#.
					#Configure the max stress a kinetic block of this tier can support.
					#Range: > -2147483648
					neutroniumMaxCapacity = 8388608

	#.
	#Fine tune settings related to pumps
	[kinetics.pumps]

		#.
		#.
		#Configure the individual pressure of pumps. Note that pressure is multiplied by the speed of the pump
		[kinetics.pumps.pressure]
			#.
			#Range: 0.0 ~ 3.4028234663852886E38
			andesitePressure = 8.0
			#.
			#Range: 0.0 ~ 3.4028234663852886E38
			steelPressure = 32.0
			#.
			#Range: 0.0 ~ 3.4028234663852886E38
			aluminiumPressure = 128.0
			#.
			#Range: 0.0 ~ 3.4028234663852886E38
			stainlessSteelPressure = 512.0
			#.
			#Range: 0.0 ~ 3.4028234663852886E38
			titaniumPressure = 2048.0
			#.
			#Range: 0.0 ~ 3.4028234663852886E38
			tungstensteelPressure = 8192.0
			#.
			#Range: 0.0 ~ 3.4028234663852886E38
			palladiumPressure = 16384.0
			#.
			#Range: 0.0 ~ 3.4028234663852886E38
			naquadahPressure = 32768.0
			#.
			#Range: 0.0 ~ 3.4028234663852886E38
			darmstadtiumPressure = 131072.0
			#.
			#Range: 0.0 ~ 3.4028234663852886E38
			neutroniumPressure = 524288.0